Four Indications of a Water Heater Failure

Posted by on Dec 23, 2015 in Gas Water Heater Repair Tempe, Water Heater Repair Tempe, Water Heater Use and Care

Water heaters normally complete exactly what they are supposed to complete and generally remain undetected up to the point when one needs a Tempe Water Heater Repair. However, some of the issues that appear can be prevented by having frequent maintenance by a professional. Always keep tabs on your gas hot water heater, as some of the issues which could arise might be pricey and unsafe for family and friends and animals. Here, we are describing 4 indications that a gas water heater might need to be replaced.

Leaking WaterWater Heater Repair Tempe AZ

When there is water on the ground around your water heater or dripping from a pipe, you might need to upgrade the water heater. However, based on where the water is located and the amount there is, you could be okay. Should the water heater is leaking water from a pipe and there is a little bit of water on the floor beside the water heater, it is probably the T&P valve. The temperature and pressure valve removes unwanted water vapor in the water heater, this water vapor becomes to water and comes outside of the water heater by means of a pipe on the side of the unit. Whenever this is the case, it’s completely usual and essential for the hot water heater to work accurately. Do not attempt to shift the T&P valve and never block it. In case you may be worried about the quantity of water that is coming from the pipe, get in touch with a specialist! In the event that the dripping water is originating from the underside of the tank, it’s pretty much undoubtedly time to have a different water heater. When the water heater warms water the steel tank expands and contracts, this movement might bring about cracks and minor fractures, which will gradually lead to leaking. As soon as this transpires, it is time to purchase a new system.


Around the pipes coming from the hot water heater one can find pipe fittings which must be sealed tight in order to keep the pipe in place and keep water from dripping out of the opening. In cases where you’re noticing rust around these pipe fittings, water is getting out of the hole. While it is not a big leak and will not result in immediate harm to the heater, in cases where the problem is not solved, major and pricey issues can gradually develop.

Burn Marks

In the event you happen to be noticing burn marks around the lower part of the water heater, there are 2 possible problems. However, both are rather significant and each of them necessitate an expert. One problem may be with the venting. In case the venting is blocked or was mounted incorrectly, it could cause the exhaust fumes to go back in the property. This is unsafe and may bring about illness or fire in cases where it is left undetected for long. But, it may not necessarily mean you will have to upgrade the hot water heater, and that is good. Another possible problem with burn marks might be the flue pipes inside of the hot water heater are plugged. This can lead to a lot of dangerous issues and, sadly, the hot water heater will need to be exchanged as quickly as possible.

Yellow Flame Color

Gas burning water heaters have got a blue flame beneath the tank anytime it’s functioning. However, in case you’re seeing that flame is an orange or yellow color, rather than blue, the burner is not functioning correctly and will have to be seen by a pro.

There are many issues that might appear with gas burning hot water heaters, however having frequent servicing and yearly check ups, you may be able to prevent the need for an unexpected water heater repair in Tempe which can possibly be costly. Give us a call today in case you detect something unusual with your water heater!